<NEW 신규>AMADA앵글가공기CNCBW150

신규입고 AMADA 빔워크 CNCBW150 입고완료 정비완료

Punching and Shearing Machine for Steel Bar

평면로딩장치 (재료자동이송장치) . 표준금형장착. 옵션(W캇타ASSY금형)장착

Model				CNCBW-150
Processing performance (kN)		Cut		600 x 1
		Punch		400 x 2
Processing capacity (mm)	Punch hole (φ x thickness) (mm)			φ6 x 3 - φ25 x 12
	Single cut Cross-sectional area of workpieceMax 15 cm²	Standard	Angle	40 x 40 x 3 - 100 x 100 x 7
		Special	Flat bar	38 x 3 - 100 x 12
			Channel	75 x 40 x 5 x 7 - 100 x 50 x 5 x 7.5
			C channel	60 x 30 x 10 x 1.6 - 150 x 75 x 25 x 3.2
				120 x 60 x 25 and 70 x 40 x 25 are not machinable.
			Light-weight channel	50 x 25 x 10 x 2.3 - 150 x 75 x 4.5
	Double cut	Special	Angle	40 x 40 x 3 - 150 x 150 x 12
			Flat bar	38 x 3 - 150 x 12
			Unequal-sided angle	Longer side equal to or more than 40 and not exceeding 150, thickness of 12 or less
Length of product to be processed (mm)				30 - 12000
Material length that can be processed in automatic operation mode (mm)				1000 - 12000
Minimum remnant length (cutting at the end of material) (mm)				90
Motors (kW)		Hydraulic pump		11
		Material feed		0.75
		Gauge line		0.2 x 2
Power requirement (kVA)				23 (or 26 with flat loading)
Machine dimensions (W x L x H) (mm)				2212 x 2400 x 1648 (not including carriage)
Mass of machine (kg)				4500 (not including flat loading)

Model				CNCBW-150
Processing performance (kN)		Cut		600 x 1
		Punch		400 x 2
Processing capacity (mm)	Punch hole (φ x thickness) (mm)			φ6 x 3 - φ25 x 12
	Single cut Cross-sectional area of workpieceMax 15 cm²	Standard	Angle	40 x 40 x 3 - 100 x 100 x 7
		Special	Flat bar	38 x 3 - 100 x 12
			Channel	75 x 40 x 5 x 7 - 100 x 50 x 5 x 7.5
			C channel	60 x 30 x 10 x 1.6 - 150 x 75 x 25 x 3.2
				120 x 60 x 25 and 70 x 40 x 25 are not machinable.
			Light-weight channel	50 x 25 x 10 x 2.3 - 150 x 75 x 4.5
	Double cut	Special	Angle	40 x 40 x 3 - 150 x 150 x 12
			Flat bar	38 x 3 - 150 x 12
			Unequal-sided angle	Longer side equal to or more than 40 and not exceeding 150, thickness of 12 or less
Length of product to be processed (mm)				30 - 12000
Material length that can be processed in automatic operation mode (mm)				1000 - 12000
Minimum remnant length (cutting at the end of material) (mm)				90
Motors (kW)		Hydraulic pump		11
		Material feed		0.75
		Gauge line		0.2 x 2
Power requirement (kVA)				23 (or 26 with flat loading)
Machine dimensions (W x L x H) (mm)				2212 x 2400 x 1648 (not including carriage)
Mass of machine (kg)				4500 (not including flat loading)